TECHNAL TITANE DOOR SYSTEM
Characteristics TITANE DOOR SYSTEMS
Aluminium profile without thermal-break
Up to W 1.30m x H 2.50m
Up to 140 kg
6 – 32mm
1-, 2-, or 3-point lock with rods, 3-point swing lock with face plate, 3-point roller lock with rods, 3-point roller rod with face plate
Lever handle with finger plate
Special pull handles, vertical push handle
Vertical loads: 100 daN (EN 9747-2)
Torsion (EN 9748-2)
Soft body impact: 150 Joules (EN 9747-2)
Subject to more than 1,000,000 opening/ closing test cycles (EN 1191): class 8 on the EN 642-E scale
Level 2 (EN 1627) for door fitting with 2 shear locks and a 3-point lock with rollers
Maximum Weight Per Panel
Torsion and buckling tests
Forced entry delay
Rounded shape identical to the profiles of the opening/outer frames and the fixed sections on the composite frames.
Minimal aluminium thickness (128 mm).
Continuous intermediary transoms between opening frames and fixed sections.
Available version with finger protection.
Patented system: concealed top and bottom hinges.
Centre plate assembly set into the ground and a corner piece forming part of the opening frame fitted with self-lubricating needle roller bearing.
Casing with adjustable rod fixed to the outer frame with an insert.
Level 2 classified door according to the standard EN1627.
Door-closer is recessed into the transom of the opening frame.
Inaccessible external glazing gaskets.
External glazing stops are clipped and screwed into the recess.
Fixed internal glazing stops for forced entry and vandalism delay.
Option of electromagnetic lock recessed into the mullions for an extraction resistance of: 300 kg/standard electromagnetic lock, 750 kg/shear lock.
– 1-, 2- or 3-point with rollers, recessed or on a full-length face plate
– 3-point pivoting deadbolt
– Emergency access cremone bolt
– Electric strike
– Push button